IntelliQuilter

Forums

• Announcements

  • ★ Improved Customer Support

• Community Help

  • Understanding Quilting Terms: A Guide to E2E, P2P, B2B, and More
  • Will magnetic accessories affect my IQ?
  • Can I use the IQ with A-1's "eccentric wheels"?
  • Need to add additional row with Panto only system
  • Can I use Compuquilter patterns on the IQ?
  • What version .dxf is the IQ compatible with?
  • Storing IQ tablet for long periods
  • Computer Art Files
  • Can I view IQP pattern files on my computer?
  • How do I check my battery charge?
  • BasiQ tablet information
  • Stylus information
  • Motor Movement Monitoring
  • i400 tablet controls and docking
  • User Manual
  • Can I change the brightness on my tablet screen?
  • How can I get access to area under docking station?
  • Prodigy, Proto or Kenquilt Standard Settings
  • Nolting with Steel Table Standard Settings
  • Innova Standard Settings
  • Gammill Unregulated with SS Standard Settings
  • Gammill Unregulated with Needle Positioner Standard Settings
  • Gammill with Standard Table Standard Settings
  • Gammill with Breeze Standard Settings
  • APQS 26 Standard Settings
  • A1 Elite Standard Settings
  • What should my motor engagement strength be?
  • How do I sync my tablet and StiQ?
  • Can I sync my two tablets?
  • Where can I find the patterns included with Intelliquilter?
  • Do I have to change my Breeze wheels to have IQ installed?
  • How do I re-set my IQ for a different machine?
  • I can't get to the intelliquilter training page.
  • Where can I find the new magnet and distort tools?
  • What programs can be used to make patterns for IQ?
  • How do I download patterns to the IQ?
  • How do I send my logs?
  • Motor Alignment
  • Think you deleted the wrong pattern?
  • Catalog cleanup
  • Where can I purchase a new battery for my tablet?
  • IQ Parts and Terms
  • Routine Maintenance
  • What file format does IQ use for patterns?
  • How should I clean my wheels and tracks? Should the rubber wheel be cleaned differently?
  • How do I find my tablet password?
  • What strength engagement should I have Super Motors at?
  • How do I get a "clicker" remote control?
  • Organization

• Troubleshooting

  • Supermotor Removal
  • My tablet battery has a crack.
  • APQS machine stops stitching or stitchs in place
  • Motor Lift Fail
  • Memory Limit Reached Message
  • Machine does not take stitch
  • Touchscreen is not responding properly
  • Jumpstitches aren't working properly
  • Stitches for a few seconds then stops
  • Problems loading patterns
  • Thread is breaking
  • One motor is slower to raise
  • My ClassiQ LT tablet will not boot
  • Tablet says it has performed an update but I have not updated.
  • My USB or StiQ has new folders called Spotlight v100 and Trashes
  • Bolts on motor bracket are stripped
  • One motor bolt spins but other does not move
  • Battery E(1) message
  • Battery E(2) message
  • Message "unable to open directory"
  • Communication Errors
  • A4 error
  • Supermotor limiting screw height
  • Screen does not show motor movement properly
  • Frequent bobbin backlash or bobbin thread breaks
  • Interface error in Communications Test
  • Tablet giving message "Plug in power line"
  • Faint images of screens during bootup
  • Tablet stops booting at "initializing and establishing link"
  • Tablet is getting too hot
  • Machine slows down while stitching
  • Where can I find my battery percentage?
  • Tablet stops booting at Boot Device screen or Media Test Failure
  • My computer wants to "fix errors" on my USB or Stiq
  • T201 Power Switch Replacement
  • Replacing Coin Battery in i500 tablets
  • Message "Recycle Bin is Full"
  • I have lost "Last Quilt" catalog
  • Tablet says "memory full"
  • Extra stitches when pause is hit
  • Needle stays down but machine keeps moving
  • IQ will not boot with message "Failed to start local"
  • Tablet says new Stiq is unauthorized
  • The tablet will not boot
  • Getting skipped stitches
  • Machine feels stiff in manual mode
  • Cannot download patterns from USB
  • There is a problem with a pattern
  • The update won't download to my tablet
  • The beep has gotten too quiet
  • Where can I purchase a power cord for my IQ?
  • My logs are too big to post
  • Motor continues to run when engaging/disengaging
  • Low battery % and machine won't stitch
  • I have an old battery that does not charge
  • Gammill Plus machine randomly stops stitching
  • Intermittent communication errors
  • Black screen on tablet.
  • Screen is not following speed of motors
  • Machine is making zigzag stitches.
  • Motor is making a noise and taking too long to raise
  • Communication Error E1
  • The motors are moving opposite how they are supposed to.
  • Supermotor lift screw keeps turning.
  • My tablet is making noise.
  • Communication Error E2
  • What kind of tool do I need to remove my motors?
  • Options "Mark on Quilt" and "Trace on Quilt" not available
  • Where do I order a new motor belt o-ring?
  • I need to replace my T200 coin battery.
  • Stitching is erratic.
  • Motor keeps running with a grinding sound in manual mode
  • Machine moves but does not stitch
  • Machine hesitates or sputters when stitching
  • I cannot move the pause marker.
  • Red light on tablet and battery will not charge
  • Screen displays 'ME Firmware is unprotected' and will not boot.
  • IQ will not boot and says 'Give root password for maintenance (or type Contol D to continue)'
  • Machine stitches in one place
  • Tablet is giving A1 error
  • Tablet says "Stitch Regulation Required".
  • IQ does not stop when bobbin runs out
  • Power switch cap replacement on i400 tablets
  • Tablet says "Plug in AC-Adapter"
  • Motor bracket adjustment procedure
  • Auxiliary tablet bracket installation and use
  • Replacing coin battery in T400 tablets
  • I think I have a loose cable going into the junction box. How do I fix it?
  • "Communication Error" is flashing at the top left of the screen.
  • Tablet stops at BIOS boot-up screen and asks for pressing F1 or F2 to continue.
  • Screen shows "System initialization has failed! Do you want to continue booting?"
  • When left for a time, the IQ shuts down. How do I get it back on?
  • Machine wobbles while stitching.
  • Machine will not calibrate.
  • The screen on my tablet has cracked.
  • My start and end points are not meeting.
  • The securing stitches are not secure.
  • My machine is giving false thread break errors.
  • My drive wheel has developed a flat spot.
  • Screen will not pan with line pattern