Follow

Options "Mark on Quilt" and "Trace on Quilt" not available

Make sure that your tablet is mounted on your machine and that your motors are connected. If your tablet says Demo Mode on the screen, you will not have these options to mark out a block because there is no communication with the motors. You can check if there is a communication error with one or both motors by running the communications test (Main Menu> System->Interface Setup/Test and start Communication Test, for update 8.20.15 or later it is found under Main Menu> Utilities> Configuration> Interface Setup/Test). If there is a motor error, follow the steps found here:

http://intelliquilter.com/iQpedia/Demo_Mode.php

0 Comments

Please sign in to leave a comment.
Powered by Zendesk