You will need to do a thread break sensor reset:
- Shut down the tablet.
- Unplug and reinsert the phone cable at both ends. When plugging in, hold the cable, not the plug, and push it in the socket until you hear the clicking of the tab of the connector.
- Turn on the tablet.
- Turn off the quilting machine.
- Go to System->Interface Setup/Test and touch the Start Switch button. The Thread Break label should turn red and say “Thread Break ON”.
- Pull the thread through the sensor. The label should turn white and say “Thread Break OFF”.
- Stop pulling the thread. The label should indicate the thread break.
- Go back to the Main Menu, turn on the quilting machine and continue quilting...